NetApp Certified Implementation Engineer - SAN ONTAP v1
Question 1
You have a 100 GB volume with the space guarantee set to volume. This volume contains two space reserved 20 GB LUNs. Both LUNs are at 50% use. You then create a Snapshot copy of the volume. No modifications were performed since the Snapshot copy was completed, and all actions were performed using the CLI.
In this scenario, how much free space does the volume have?
- A. 80 GB
- B. 40 GB
- C. 20 GB
- D. 60 GB
Answer : C
Question 2
Click the Exhibit button.
Referring to the exhibit, which WWPN would safely be removed from the zone?
- A. 20:09:00:a0:98:32:99:07
- B. 50:0a:09:84:8d:7c:51:d5
- C. 20:07:00:a0:98:32:99:07
- D. 21:00:00:c0:dd:19:4b:f3
Answer : D
Question 3
Click the Exhibit button.
During testing, an administrator notices that the wrong subsystem was returned using the nvme discover command. The administrator was expecting test0_subsystem as the subsystem.
Referring to the exhibit, what would cause this discrepancy?
- A. The wrong NQN was mapped to the subsystem.
- B. The wrong WWPN was used in the discover command.
- C. The NVMe was not configured on the test0 SVM.
- D. Asymmetric Namespace Access (ANA) was not properly configured.
Answer : D
Question 4
You have a SAN host that is only sending traffic to an ONTAP cluster using active non-optimized paths.
In this scenario, over which network type does the node that is hosting the target LUN receive the traffic?
- A. cluster network
- B. iSCSI network
- C. intercluster network
- D. Fibre Channel network
Answer : A
Question 5
You have an 8-node AFF A400 ONTAP 9.8 cluster that is serving FC and iSCSI LUNs. You have three SVMs for FC and one SVM for iSCSI, each for separate VMware vSphere clusters. The VMware clusters are on separate, non-routable, networks. You are asked to set up SnapCenter software for backups of the virtual machine datastores.
What is the minimum management LIF count that is needed to satisfy this requirement?
- A. eight
- B. two
- C. four
- D. one
Answer : D
Question 6
You want to perform online data migration using Foreign LUN Import.
In this scenario, which two conditions are required to support this task? (Choose two.)
- A. FCP protocol LIFs must be added to the data SVM.
- B. FCP initiator ports must be available.
- C. iSCSI targets must be added to the ONTAP iSCSI initiator.
- D. iSCSI protocol LIFs must be added to the data SVM.
Answer : BC
Question 7
During maintenance of an AFF A250 none, you want to move the SAN LIFs that are members of a port set.
In this scenario, which two statements are true? (Choose two.)
- A. You need to disable the zoning of the LIF WWPN.
- B. You must disable SLM for the node that hosts the LIF.
- C. You must take the SAN LIF offline.
- D. The LIF must be removed from the port set.
Answer : CD
Question 8
You are a system administrator and responsible for a NetApp AFF A800 2-node ONTAP 9.8 cluster that is used only for SAN. Your SAN uses FC and FCoE on the same Cisco switches. You want to add NVMe from the ONTAP controller to the same Cisco fabric.
Which two statements are correct in this scenario? (Choose two.)
- A. FC and NVMe can share the same 32 Gb physical port.
- B. The same SVM can serve both the FC and the FCoE protocols.
- C. The same SVM cannot serve both the FC and the NVMe protocols.
- D. FCoE and NVMe can share the same physical port.
Answer : CD
Question 9
Which FC service is used by a host for discovery service to locate FC targets that are available?
- A. the fabric zone server
- B. the fabric configuration server
- C. the fabric name service
- D. the fabric security server
Answer : C
Question 10
You upgraded your Linux hosts to SUSE Enterprise Linux 15.
In this scenario, which two actions should you perform before you test asymmetric namespace access (ANA)? (Choose two.)
- A. Verify if the LUNs and namespaces are in the same volume.
- B. Verify if the version of NetApp ONTAP software is 9.5 or later.
- C. Verify if the NVMe service has started.
- D. Verify if there is only one LIF in the SVM.
Answer : BC
Question 11
Which two components should be installed to support VMware VMFS6 datastores in an environment with only Ethernet switches? (Choose two.)
- A. Host Utilities
- B. NetApp Virtual Storage Console
- C. V_StorageAttach license
- D. iSCSI license
Answer : BD
Question 12
You are reconfiguring a VMware vSphere host for FC access to a NetApp ONTAP cluster.
In this scenario, which two tasks does NetApp recommend performing on the vSphere host? (Choose two.)
- A. Use the NetApp Virtual Storage Console to configure the host settings.
- B. Set the queue depth on the host to 8.
- C. Update the HBA driver.
- D. Zone the host by using the host WWNNs.
Answer : AD
Question 13
You are configuring a 4-node AFF A400 ONTAP 9.8 cluster. The data center switches have limited ports, and you are given one 10-Gigabit Ethernet port per node for external access.
In this scenario, which three protocols share the same physical port? (Choose three.)
- A. NVMe/FC
- B. FCoE
- C. iSCSI
- D. SnapMirror
- E. FC
Answer : ACE
Question 14
An administrator has migrated an iSCSI LUN with the Foreign LUN Import (FLI) tool. The migrated LUN is present on the new AFF system but it is not visible to the host.
In this scenario, which additional action must be completed to make the LUN visible?
- A. Stop the FCP service.
- B. Bind the igroup to a port set.
- C. Install ANA software on the host.
- D. Map the LUN to an iSCSI igroup.
Answer : D
Question 15
You need to migrate boot LUNs from a third-party array onto a NetApp FAS8700.
Which three actions are required to complete this task? (Choose three.)
- A. Convert every FC target port on each controller to an FC initiator port.
- B. Create zoning between the third-party array to the FAS8700.
- C. Convert a single FC port on each controller to an FC initiator port.
- D. Verify third-party array support by using the Interoperability Matrix Tool (IMT).
- E. Reboot the third-party SAN to prepare for the LUN import.
Answer : BCE