NetApp Certified Storage Installation Engineer, ONTAP v1.0
Question 1
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
- A. Use the Intelligent Platform Management Interface.
- B. Use the Service Processor Interface.
- C. Use Secure Shell.
- D. Use Telnet.
Answer : BC
Question 2
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. admin SVM
- B. system SVM
- C. node SVM
- D. data SVM
Answer : AB
Question 3
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
- A. Hardware Universe (HWU)
- B. Interoperability Matrix Tool (IMT)
- C. hardware installation setup poster
- D. AFF FAS Documentation Center
- E. Active IQ Unified Manager
Answer : ACD
Question 4
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. data switch cabling
- B. cluster switch cabling
- C. shelf connectivity
- D. node CPU utilization
Answer : CD
Reference:
https://www.doc-developpement-durable.org/file/Projets-informatiques/cours-&-manuels-informatiques/Netapp/Data%20ONTAP%208.0%207-Mode%
20System%20Administration%20Guide.pdf
Question 5
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. term-based
- B. perpetual
- C. base
- D. master
Answer : AB
Reference:
https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf
(10)
Question 6
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. Flash Pool
- B. thin provisioning
- C. FlashCache
- D. FlexClone volumes
Answer : AC
Question 7
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Active IQ Config Advisor
- B. Interoperability Matrix Tool
- C. Active IQ System Manager
- D. Hardware Universe
Answer : AB
Question 8
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. SFP+ port
- B. rlogin
- C. SSH
- D. serial port
Answer : CD
Question 9
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. SNMP
- B. AutoSupport
- C. BGP
- D. EMS
Answer : D
Question 10
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. NetAppDocs
- B. Inventory Collect Tool
- C. SnapGathers
- D. Active IQ OneCollect
Answer : A
Reference:
http://197.253.9.244/ontap%209-5/Cluster%20Admin/2_Student%20Guide/STRSW-ILT-ONTAPADM_StudentGuide.pdf
Question 11
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customerג€™s requests are satisfied?
- A. Perform a takeover of Node 2 to ensure that it does not run.
- B. Assign all data LIFs to Node 1.
- C. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
- D. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
Answer : B
Question 12
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- C. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- D. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
Answer : A
Question 13
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use the cluster image package get and cluster image update commands.
- B. Use a USB drive with the new software image and let ONTAP automatically boot.
- C. Use ONTAP System Manager to download and install the new software image.
- D. Use ONTAP System Manager to upload and install the new software image.
Answer : AC
Question 14
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager system nodes.
- B. View the ONTAP System Manager cluster settings.
- C. Use the cluster image show CLI command.
- D. Use the san config show CLI command.
Answer : AD
Explanation:
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the
ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as ג€ASAג€ for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems
Question 15
You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.
How do you verify your configuration?
- A. Use the storage show disk -p command.
- B. Use the storage disk option show command.
- C. Use the disk show -fields initiator command.
- D. Use the sysconfig command.
Answer : C