NetApp Certified Storage Installation Engineer, ONTAP v1

Page:    1 / 4   
Exam contains 59 questions

Click the Exhibit button.

You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After attempting to add the node, it fails as shown in the exhibit.
What are two nondisruptive ways to add the new node to your ONTAP cluster? (Choose two.)

  • A. Revert the cluster from ONTAP 9.8 to ONTAP 9.7.
  • B. Re-initialize all the nodes in the ONTAP cluster with ONTAP 9.7.
  • C. Upgrade the new node from ONTAP 9.7 to ONTAP 9.8.
  • D. Add the node using the -allow-mixed-version- parameter.


Answer : CD

Click the Exhibit button.

You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in the exhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)

  • A. 2 paths up, 0 paths down (TCP check)
  • B. 2 paths up, 0 paths down (UDP check)
  • C. larger than PMTU communication succeeds on 4 path(s)
  • D. basic connectivity succeeds on 4 path(s)


Answer : AD

You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

  • A. Add the shelf to the existing stack.
  • B. Create a new stack on the HA pair to add the shelf.
  • C. Connect the shelf to an HA pair with NSE drives.
  • D. License NSE and add the shelf to this HA pair as a new stack.


Answer : A

You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?

  • A. cluster-mgmt
  • B. intercluster
  • C. data
  • D. node-mgmt


Answer : B

You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

  • A. Load the Storage RCF.
  • B. Cable the AFF A250 nodes to the next free ports on the switch.
  • C. Cable the AFF A250 nodes to the breakout ports on the switch.
  • D. Load the Cluster-HA-Breakout RCF.


Answer : CD

You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for the deployment?

  • A. Interoperability Matrix Tool
  • B. ConfigBuilder
  • C. Active IQ Config Advisor
  • D. Active IQ Unified Manager


Answer : A

You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)

  • A. The AFF A250 requires switches with 40GbE port support.
  • B. The AFF A250 uses different ports for the cluster and the HA interconnect.
  • C. The AFF A250 requires switches with 25GbE port support.
  • D. The AFF A250 uses the same port for the cluster and the HA interconnect.


Answer : BC

A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?

  • A. IQNs
  • B. WWNNs
  • C. WWPNs
  • D. host names


Answer : D

You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)

  • A. cluster certificate
  • B. server certificate
  • C. root CA certificate
  • D. ONTAP certificate


Answer : BC

Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

  • A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
  • B. to install cross-site cluster management switches
  • C. to provide connectivity for NVRAM over iWARP
  • D. to enable SyncMirror replication


Answer : AC

A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host’s OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?

  • A. ONTAP System Manager
  • B. Active IQ Unified Manager
  • C. Active IQ OneCollect
  • D. Interoperability Matrix Tool


Answer : A

You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?

  • A. Install the license file.
  • B. Install the CSHM configuration file.
  • C. Install the reference configuration file.
  • D. Reboot the controllers.


Answer : C

You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither “un-failing” nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)

  • A. Ask the customer to open a technical case with NetApp Support.
  • B. Ask the customer for a drive with the same capacity and replace it.
  • C. Run Active IQ Config Advisor to collect all the logs on the system.
  • D. Power off the system until the drive has been replaced.


Answer : BC

Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

  • A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
  • B. The LIFs must use the default intercluster service policy.
  • C. The LIFs must be in dedicated broadcast domains an IPspaces.
  • D. At least one LIF per node is required on each cluster.


Answer : BC

You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

  • A. Active IQ Digital Advisor
  • B. Active IQ Unified Manager
  • C. Cloud Insights
  • D. ONTAP System Manager


Answer : B

Page:    1 / 4   
Exam contains 59 questions

Talk to us!


Have any questions or issues ? Please dont hesitate to contact us

Certlibrary.com is owned by MBS Tech Limited: Room 1905 Nam Wo Hong Building, 148 Wing Lok Street, Sheung Wan, Hong Kong. Company registration number: 2310926
Certlibrary doesn't offer Real Microsoft Exam Questions. Certlibrary Materials do not contain actual questions and answers from Cisco's Certification Exams.
CFA Institute does not endorse, promote or warrant the accuracy or quality of Certlibrary. CFA® and Chartered Financial Analyst® are registered trademarks owned by CFA Institute.
Terms & Conditions | Privacy Policy